Pioneer Elite 7.2 Channel Network AV Receiver (VSX-LX105)
$599.99
$899.99
33% off
Reference Price
Condition: New
Top positive review
11 people found this helpful
Upgrade from My Old Onkyo Receiver
By L. Zinn on Reviewed in the United States on May 23, 2024
I purchased this Pioneer Elite VSX-LX105 7.2 Channel Receiver to replace a failed 16 year old Onkyo unit. My decision was based on features and the reviews from others. If their product gets a 4.4 rating, Pioneer must be doing something right. I have one Klipsch sub-woofer and seven other speakers, so I only needed 7.1 channels. After setting the system up, here's what I like: Alexa compatibility, sound quality, value for the money, a front panel knob for changing inputs, easy to read display, and the simple setup including automatic sound calibration in my listening room. Things I didn't like: speaker terminal layout on the back panel.Setting up Alexa was as easy as logging into my Amazon account. The receiver displayed a QR code on the TV and I used my phone to complete the login. I gave it the original sounding name "Receiver," and that was it. The first time I used my voice to tell Alexa to stream (name of song) on the "Receiver," I was amazed! I'm convinced the Pioneer surround sound quality is better than my old receiver. The price was reasonable compared to other similar receivers. The controls are definitely better than my old Onkyo. It had buttons with very small labels for changing inputs. These labels and the display were difficult to read. If I used the front panel for changing inputs it was through trial and error. By contrast, the Pioneer receiver makes it easy to change inputs from the front panel with a large knob and a bright display. If the display is too bright, it can be adjusted. The automatic sound calibration procedure begins by simply plugging in the microphone on the front panel. There's also an option to set up the speakers manually.The most difficult part of the setup was attaching speaker wires to the terminals on the back. Most of my speakers have banana plugs, which are easy to attach, but three speakers have bare wires. These were hard for me to attach using the screw terminals. Each pair is arranged over/under, not side by side like the Denon receivers. I had trouble getting my fingers in the tight space. Side by side would be better. However, once the speakers are connected, you shouldn't have to touch the terminals again unless you relocate the receiver. It's not a show stopper.
Top critical review
5 people found this helpful
Not compatible with Nvidia Shield, wasted 6 hrs to find this out.
By MJ on Reviewed in the United States on February 18, 2024
I purchased this AVR to replace a dead Onkyo 4K Receiver in my theater room. My setup is an Epson Pro Cinema 4040 Projector with a NVidia Shield Pro as my streaming device. The issue is this AVR will not support the NVidia Shield. I can plug my Shield in directly to my projector and have a perfect picture, however when I plug my Shield to the receiver the Shield OSD cycles on and off constantly. I even bought a new certified HDMI cable to make sure that wasn't the issue. I have spent over 6 hours researching and changing different settings on the AVR and the Shield and nothing has fixed the issue. Very frustrating and now I am going to return it.Update: After messing with this some more I discovered that the issue was that the Pioneer Elite AVR degrades the HDMI signal strength. I have to have a 35 foot HDMI Cable to reach my ceiling projector. I discovered that if I plug my Nvidia Shield or AppleTV directly to my HDMI cable going into my projector I get a picture. If I plug the Pioneer AVR in between the 2, I do not get a picture. To test this, I moved the Pioneer AVR closer to my projector and used a 10 foot HDMI cable and I got a picture on my projector. If you have a long HDMI cable run, I would suggest to look at a different AVR.
Sort by:
Filter by:
Sorry, no reviews match your current selections.
Try clearing or changing some filters.Show all reviews
Show more reviews