Rexing V2 Pro Full HD Dual Dash Camera

INTRODUCTION I recently purchased the Rexing V2 Pro AI dash cam, which has the three channel (front, cabin, rear) cameras that you can run at 1080p. This replaced my older Rexing V1-4K Ultra HD dash cam. Purchased from Amazon with a $30 coupon so total cost with tax was $250. This was a big upgrade as I gained another camera for the cabin, 1080p resolution (all cameras), GPS built in the dash cam, improved night vision and AI. (The V1 required an external GPS Logger which was one more thing to stick to the windshield.) The dash cam came well boxed and was delivered in one week by ordering thru Amazon. Installation was quite easy since I already had my Mini-USB hardwire kit for the V1 hooked up to an ignition switched fuse and constant power fuse in my engine compartment. (2017 Ford Expedition EL) MOUNTING CAMERA Removing the old mounting bracket was tricky but with a razor was able to slice it off and then remove the old sticky tape. Mounting the new bracket was pretty quick. Remember to make sure the front lens is within the wipers range and also not in front any visual obstructions on the windshield. Clean the windshield with alcohol wipe before mounting the bracket. Make a dry run with the camera connected to the bracket and cameras all pointing in the direction you would like and turn the camera on. View the camera screen to make sure the two views are OK. Note: I did have to rerun the rear cam wire and mount a new bracket to the back windshield for the new rear camera installation. As with the front/cabin dash cam, make a dry run with the back cam to make sure it is placed unobstructed and has a good view. Making wired connections were easy as mentioned above. I highly recommend to purchase the hardwiring kit as the dash cam turns on when I start the SUV. Don’t forget to purchase a micro SD card. I use a SanDisk 128 Ultra MicroSDXC UHS-I. This card allows me about 4 to 5 days of recording all three cameras a 1080p. I set the recording time to 5 minutes and file sizes range from 150MB to 421MB. Remember, for every 5 minute segment there are 3 MP4 files, one for each camera. PHONE WITH WIFI To use the WIFI connection to the V2 Pro you need to download the Rexing Connect App. The WIFI connection to my Samsung Android phone was immediate and simple. With a WIFI connection you can see live camera on your phone. You are also able to view all of your 5 minute segment recorded MP4 files. The app is very responsive and videos come across quickly without buffering or lag. I have not downloaded a file but I know that is possible. COMPUTER WITH SOFTWARE To view video files on your computer you first download the Rexing software called GPS Player. To play videos, remove the MicroSD card from the V2 Pro and insert into an SD card adapter. Using the software, open the files on the SD card. Once the file is loaded you can see the track of the 5 minute segment in a red line on a Google map. In playing the video off of the SD card the video was a little jumpy but the timing of the video with placement on the map was very accurate. The video quality was excellent. AI The AI works well however I am not sure if it is something I would use or need at this point. I plan to mess with it a little more to explore its potential. CONCLUSION SUMMARY PROS: Overall a great dash cam, easy installation, WIFI connection to Phone, Viewing video route with GPS with GPS Player great accuracy. Video resolution is excellent. CONS: Paper instructions has very small print, Still working on what AI really provides and how useful it is (after two weeks)