QualGear Qg-TM-004-WHT 23-Inch to 55-Inc

After reading MANY reviews and looking at three similar products each double to triple the price, I decided to go with this for my new Panasonic 65" mini-led TV. I wanted it flat on the wall, with no need to position or rotate/tilt. This offered the closest application to the wall .4/.5" - I'm happy to report it worked perfectly. Now, you can flex the bar with your two hands OFF the wall, but secured to the wall it's more than strong enough to hold the properly sized/weighted tv. Don't be afraid. Had every part necessary imaginable included with multiple screw sizes. I was fortunate my application hit TWO STUDS so I'm very confident of its installation. DO pre-drill out the screw-holes at LEAST 3" inches deep as the thick lag screws are a BEAR to screw into the studs easily. My only mistake was not having a metric Socket wrench to make their tightening easier. You WILL STRIP the screws with a Phillips screwdriver and practically strip your hand in the process. PLEASE do yourself a favor and have the appropriate size socket wrench/head available and you'll be fine. I used four lag screws into the studs and it felt very secure. I would suggest if you don't hit two studs to increase your four screws to SIX if you are using in drywall applications. I think adding the additional screws will stabilize the wall plate. Do yourself a favor and loop a LONG string between the pull-downs that clip the bottom of the holder into place AFTER handing the tv. it will be IMPOSSIBLE to try to grab them once on the wall .. impossible. Pull down and click into place and then you can cut the string and remove it so it's not visible or tuck it up behind for future use. I'm a thoroughly impressed by the relative ease, contents and SLIM attachment to the wall. I'd buy this again and look no further.