beyerdynamic DT 770 PRO 32 Ohm Over-Ear Studio Headphones
$119.99
$249.99
52% off
Reference Price
Condition: New
Top positive review
221 people found this helpful
Wow! Incredible.
By Hockey Mom on Reviewed in the United States on December 11, 2022
I do have an audiophile ears, but I do not own any audiophile equipment. Recently I bought a Yeti Plus microphone that has an audio jack for monitoring audio. So, I plugged in my Bose QC35 headphones, using the 3.5 mm audio cable, and it sounded OK. But, it didn't sound great. I decided to subscribe to Apple Music to see what the music sounds like via this setup. It was nothing to write home about. I then plugged the same QC35 headphones to my 2021 Apple M1 Pro MacBook Pro (14"), and it sounded exactly like it did out of the Yeti X microphone's headphone jack.I decided to research and see why the quality was so low. I don't normally listen to music, but I couldn't imagine that the Apple Music streamed (even at the highest selectable quality) would be so unremarkable. So, I looked up the impedance of the audio jack of the Yeti X microphone, and I realized that it's a high-impedance audio output. Then, I looked up the 2021 M1 Pro MacBook Pro specs, and what do you know? It also has a high-impedance output audio jack (unlike the 2020 M1 MacBook and MacBook Pro). So, then I googled what impedance should the headphones have for high-impedance audio outputs and learned that the impedance of the headphones should be at least 8-10 times of the impedance of the audio output in Ohms.Hence, I started the search for the high-impedance headphones. I've read hundreds of reviews, and I finally found the DT 770 PRO 250 Ohm headphones. They were well reviewed, they were relatively inexpensive, they they had a version with 250 Ohm of impedance (which is about 8 times as high as the audio output of the Yeti X audio jack). So, I decided to try these headphones. I ordered them and received them the next day via Amazon Prime shipping. As soon as I plugged them in and started the stream from Apple Music, my jaw dropped. This is what I was looking for, and here it is. Unbelievable I could get a jack pot on the first attempt for under $200 and especially becasue they are made in Germany. How is this even possible?Now, are they comfortable to wear? To me, they are a little too tight. Are they worse than the Bose QC35 when it comes to comfort? Maybe Bose QC35 are a little more comfortable. But, when it comes to the sound, OMG. There is no comparison.Unless you want to pay many times more for premium high-impedence headphones just to get a better fit, then go ahead and get the ones for $1500, $2500, etc. Otherwise, these are amazing when it comes to the audio quality. Can anyone tell that these are better than the QC35? Yes, anyone can tell unless you use these 250 Ohm ones with a low-impedance audio output like in smartphones, older MacBooks, etc.Now, my son has a 2020 M1 MacBook Air, which is an excellent laptop, but it has a low-impedance audio jack output. So, for my son, I've ordered an 80-ohm version to compare to my 250-ohm version. I will let him decide which one to go with.I'd suggest getting both the 80-Ohm and the 250-Ohm version and compare them side by side - as long as you are getting these headphones for a decent piece of audio equipment. If you are getting them for an iPhone (not sure why you would), then maybe you should go with the lowest-impedence version.Edit:I've now compared the 250 Ohm version to the 80 Ohm version. In the beginning, I couldn't tell any difference when using them with my Yeti X microphone's high-impedance audio out jack and the 2021 M1 Pro MacBook Pro high-impedance audio jack. However, the more I listened to both, the more I started hearing the difference. I then switched to testing both 250 Ohm and the 80 Ohm headsets exclusively with the 2021 M1 Pro MacBook Pro's high-impedance audio jack because it turned out that the Yet X audio jack shows its shortcomings when music with serious bass is played out of it.In my opinion, the 250 Ohm headset reproduces the sounds more accurately. When listening to Seven Nation Army by The White Stripes (on Apple Music lossless), I could actually hear some imperfection in the bass guitar (like the string was moved under the player's finger accidentally, resulting in a little distortion), while I couldn't hear this through the 80 Ohm headset.When listening to Bohemian Rhapsody Remastered in 2011 on Apple Muisci (lossless), It appears that mids and the highs are a bit dulled down through the 80 Ohm headset, whereas they are crystal clear through the 250 Ohm headset. We are talking here very subtle differences that can only be detected while listening to the same piece over and over again via both headsets (back to back).It appears that the best songs recommended for testing headsets are:1. Bohemian Rhapsody Remastered (2011) by Queen. ...2. Seven Nation Army by The White Stripes. ...3. Feels Like We Only Go Backwards by Tame Impala. ...4. Heroes (2017 Remaster) by David Bowie. ...5. No Time for Caution by Hans Zimmer. ...6. Diamonds From Sierra Leone by Kanye West. ...7. Now We Are Free by Hans ZimmerAdditionally, I was using the 2021 M1 Pro MacBook Pro's audio jack (which auto-senses high-impedance and low-impedance headphones). I'm not sure what it does for the 80 Ohm headphones: does it consider them low-impedance or high-impedance because, in reality, they are medium-impedance headphones. Compared to other laptops, the 2021 M1 Pro MacBook Pro probably has a decent-quality pre-amp and DAC similar to inexpensive (less than $200) standalone DACs with pre-amps. So, perhaps to hear the difference between the 80 Ohm and 250 Ohm versions of this headset, one should use decent audio equipment. My son hasn't yet tested the two headsets with his 2020 M1 MacBook Air, so I'm not sure which one he decides on. I will post another update later.
Top critical review
27 people found this helpful
Extended Wear Uncomfortable, Positioning Important
By Nate @fit.kore on Reviewed in the United States on July 27, 2023
Hi folks.. a not-so-technical review from a self-described audiophile. I'm a gamer, bodybuilder, remote software engineer, and beginner, at best, audio creator (terrible uke and singing skills). I have multiple listening scenarios that I attempt to fill and am not looking for one size fits but rather one size fits a variety in a desktop workstation environment.My Situation: Money is not a huge object for me but I try and stay in the $200-500 range for any single piece of hardware that is AUDIO related. I have many listening devices for my different scenarios and this one was purchased for my home office so I don't have to break out my gym-dedicated in-ears (Jabra Elite 7 pro, these primarily stay in my gym bag or truck) or my travel headphones for remote work (sony 1000xm5, these stay in my backpack unless my wife steals them). I picked both of those listening devices after running through nearly every top-of-the-line consumer-grade headphone/earbud. I purchase new devices every couple of years roughly in search of things like audio quality, comfort, durability, practicalness, and, in the case of earbuds reliable connectivity.Need: I have dogs and work from home. My wife likes to run into my office and just start talking at times whether I'm meeting or not and I'm ok with this as I've earned the flexibility to be present with my career success (or I've learned to keep my mic muted unless I'm actively talking :)) The gap I had was a dedicated solution for my desk workstation so I don't have to plug my XM5 into my USB audio interface (FocusRite Scarlett 4i4). I didn't want to be jumping into a Zoom call at 6 am and be searching for my XM5 headphones or be forced to use my cell phone. I want to roll out of bed and into my office chair and be ready to go with one eye open. Also, I want to be able to monitor my microphone comfortably with a reasonable configuration I can change quickly enough (hence the Scarlett 4i4)The sound seems pure enough and has accomplished my goal of acquiring a headset with large ear cups, a wired interface, and a reasonable price to keep stationary at my home workstation for basic needs like music, gaming, and meetings. I use a dedicated mic (shure sm58) and the Scarlett 4i4 which I monitor using the headphones. I also have a small ukelele plugged in that has a built-in amp and some Yamaha 5" powered monitors as the other output. This setup works fine enough aside from electrical noise to the Scarlett 4i4 from my graphics card spinning up which I hope to resolve with a non-bus-powered USB audio interface in the near future.Problem 1: These headphones squeeze my head quite a bit. I'm a 200lb male that wears his snapback hats with the last 2-3 holes to give an idea of my sizing (not sure if my weight would make my head fatter or not ??) I also have reasonably sized ears (re: not tiny) that stick off my head in a medium way... so not dumbo and not flat to my head (re: somewhere in the middle). The cartilage in my ear becomes sore after all day usage but mostly makes it all the way through an 8 hours session and sometimes a little music/gaming after. Also, I think this also gives me a headache from time to time (maybe twice a month).Problem 2: The positioning on my ear is important if they are set too far back then the sounds can seem imbalanced or muted as the driver must be placed in the middle, or something like this, rather than angled from the front. I'm not sure of the reasoning for this but I find myself adjusting often for comfort and to avoid the problem from Problem 1.Not Really a Problem 3: They could use some amplification. I have the 80ohm paired with my FocusRite Scarlett 4i4 and 100 volume is quieter than my earbuds and cell phone maxed. The audio is definitely good enough if you care about your body's auditory sustainability, however, I would purchase an amp if you want some extra oomph for the beefy sound requirements of irresponsible listening.Summary: I would not purchase these again but am considering keeping them simply for any more pure monitoring needs (backup headphones that go in the bin with backup mice, webcams, keyboards, whatever). I will likely give these to my little brother that makes music. I will be looking for a replacement for these. I would like something with even larger earcups and a little more bass and the option for a replaceable cable. More 'colored' sound is acceptable for me.Preferred Alternative: My favorite headphones I had, that would fill this need well, were my V-Moda Crossfade 2 wireless. I used these for just about everything and had Shure e425 for my pure listening requirements. The crossfades were stolen at the gym and my Shures just got old, worn, and eventually lost as I stopped using them as much. My favorite parts of those ear cans were the replaceable cable, in-line mic that was easily attached, Bluetooth capability when needed, and most importantly, the XL memory foam cushions that were replaceable. With the release of a new iteration of the Crossfades, I'll be checking these out and seeing if my brother is about to receive these DT 770 headphones from me for his audio creation endeavors.And here are the pros/cons I came up with...Pros:- Price- Reasonable comfort- Large earcup circumference- Clarity- Build qualityCons:- Poor cable (fixed and always twisted/tangled)- Driver positioning (see problem 2)- Driver is too close or cup is not deep enough- Head grip is a tad too firm (I just read online these can be bent a little... this may resolve one of my gripes)- Adjustment is difficult without the removal of the cans- Unexciting noise which is fine but I don't think the best for my usage scenario- Sound maybe thin?
Sort by:
Filter by:
Sorry, no reviews match your current selections.
Try clearing or changing some filters.Show all reviews
Show more reviews