CyberPower CPS1215RMS Surge Protector

First things first, accept what this is. An overglorified, rack mountable, 15 amp power strip with 10 outlets. It is not a UPS, it is not a surge supressor, it is merely a PDU. It is limited to 15 amps of total currentI work in large enterprise IT as a systems administrator, and I deal with rack PDUs all the time from the likes of Dell, Cyberpower, APC, Belkin, etc... I was doing a relay / networking rack install for my home training lab / office , and I wanted a clean way to run power to all of my devise. You may notice a good number of those devices are actually desktop type. And yes they have wall wart type transformers, and no they don't work well with the PDU. I had to run 1' power extensions from the PDU to the wall warts. 3M double stick foam tape holds the wall warts to the tray immediately above the PDU. It works great, and has as clean of a look as is physically possible considering the sheer volume of cables running to and from this rack.The PDU itself is bade of a sturdy metal construction housing, drilled for rack mounting holes, with a convenient master switch, and 10 standard black outlets along the back. A heavy duty, long power cable provides incoming power. I have mine set up as the only device drawing power from an OLD CyberPower CP585AVR UPS that I refurbished a few months ago. No more daisy chains of power strips hung off the UPS, and no more UPS on my desk. The UPS sits nicely behind the desk on the floor, and like I mentioned, the cables are routed neatly within the rack.All in all I am quite pleased with the reliability, and performance dollar for dollar that CyberPower products have provided myself, and my employers / clients over the years. I fully intend to continue doing business with them for the foreseeable future.