Features
Striking Harman Kardon design leverages quality materials in a 2-channel, 170-watt stereo receiver with ultra-low distortion
It can only look and sound like a Harman Kardon if it carries the Harman Kardon name. And the advanced-caliber power derived from its high-current capability amplifiers provides you with what you need to drive the high quality sound you demand from all your playback sources and electronic devices.
High resolution DAC, featuring a 24-bit/192 kHz sampling rate
Get the most out of your signal path with a high resolution, 24-bit, 192 kHz DAC – which helps marry analog to digital in a stereo receiver providing you instant access between devices.
Complete Connectivity
Get the best of both worlds with total connectivity for both analog and digital playback.
The Harman Kardon Remote app provides control through iOS and Android platforms as part of the Harman Kardon ecosystem.
A dedicated remote application for control over iOS and Android platforms – complete with an intuitive menu system – is available in an instant through the Harman Kardon Remote app. Life couldn’t be simpler with this streamlined edge on user control.
Shipping Note: Shipping to Alaska, Hawaii, PO Boxes, and APO addresses is not available for this item
Warranty: 90 Day Harman Kardon
Specs
Highlights:
- DLNA® network compatible
- Built-in 24bit/192kHz DAC
- Phono input
- vTuner ™ (Internet radio) streaming
- Harman Kardon Remote app for compatible iOS® and Android™ smartphones and tablet
- Front-panel USB port for connection to compatible Apple® products or USB flash drive
- Ultrawide bandwidth
- A/B speaker selection
- Headphone output
- Tape monitor loop
- Subwoofer output
Power:
- 85W x 2 into 8 ohms, 20Hz – 20kHz, at <0.07% THD, with all channels driven simultaneously
High-current (±30 amps) - Ultra wide frequency response (@1W) 10Hz – 130kHz (+0dB/3dB) amplifier design
- Signal-to-noise ratio (IHF-A): 100dB
FM Tuner:
- Frequency range: 87.5MHz – 108.0MHz
- Usable sensitivity IHF: 1.3μV/13.2dBf
- Signal-to-noise ratio (mono/stereo): 70dB/68dB
- Distortion (mono/stereo): 0.2%/0.3%
- Stereo separation: 40dB @ 1kHz • Selectivity (±400kHz): 70dB
AM Tuner Section:
- Frequency range: 110V: 520kHz – 1710kHz, 220-240V: 522kHz – 1620kHz
- Signal-to-noise ratio: 38dB
- Usable sensitivity (loop): 500 μ V
- Distortion (1kHz, 50% mod): 1.0%
- Selectivity (±10kHz): 30dB
Connectivity:
- Five analog audio inputs
- USB input on the front panel to connect an iPod®, iPhone® or iPad® using an Apple® cable (not supplied) or to connect a USB flash drive with music content (MP3, WMA or WAV format)
- One high-quality phono input for connecting to record players with an MM cartridge
- Subwoofer output with trigger for direct connection to powered subwoofers
- One analog-recording output
- Network RJ45 connection to enjoy Internet radio and content from DLNA®-compatible devices that are connected to the network
Specifications:
- Power requirement: 120V AC/60Hz or 220-240V AC/50/60Hz (different models)
- Power consumption: <0.5W (standby); 310W maximum
- Dimensions (H x W x D): 4-3/4 " x 17-5/16 " x 11-13/16 " (121mm x 440mm x 300mm)
- Weight: 13.2 lbs
In the box:
- Harman Kardon HK 3700 Stereo Receiver
- Remote control
- Power cord
Specs
Highlights:
- DLNA® network compatible
- Built-in 24bit/192kHz DAC
- Phono input
- vTuner ™ (Internet radio) streaming
- Harman Kardon Remote app for compatible iOS® and Android™ smartphones and tablet
- Front-panel USB port for connection to compatible Apple® products or USB flash drive
- Ultrawide bandwidth
- A/B speaker selection
- Headphone output
- Tape monitor loop
- Subwoofer output
Power:
- 85W x 2 into 8 ohms, 20Hz – 20kHz, at <0.07% THD, with all channels driven simultaneously
High-current (±30 amps) - Ultra wide frequency response (@1W) 10Hz – 130kHz (+0dB/3dB) amplifier design
- Signal-to-noise ratio (IHF-A): 100dB
FM Tuner:
- Frequency range: 87.5MHz – 108.0MHz
- Usable sensitivity IHF: 1.3μV/13.2dBf
- Signal-to-noise ratio (mono/stereo): 70dB/68dB
- Distortion (mono/stereo): 0.2%/0.3%
- Stereo separation: 40dB @ 1kHz • Selectivity (±400kHz): 70dB
AM Tuner Section:
- Frequency range: 110V: 520kHz – 1710kHz, 220-240V: 522kHz – 1620kHz
- Signal-to-noise ratio: 38dB
- Usable sensitivity (loop): 500 μ V
- Distortion (1kHz, 50% mod): 1.0%
- Selectivity (±10kHz): 30dB
Connectivity:
- Five analog audio inputs
- USB input on the front panel to connect an iPod®, iPhone® or iPad® using an Apple® cable (not supplied) or to connect a USB flash drive with music content (MP3, WMA or WAV format)
- One high-quality phono input for connecting to record players with an MM cartridge
- Subwoofer output with trigger for direct connection to powered subwoofers
- One analog-recording output
- Network RJ45 connection to enjoy Internet radio and content from DLNA®-compatible devices that are connected to the network
Specifications:
- Power requirement: 120V AC/60Hz or 220-240V AC/50/60Hz (different models)
- Power consumption: <0.5W (standby); 310W maximum
- Dimensions (H x W x D): 4-3/4 " x 17-5/16 " x 11-13/16 " (121mm x 440mm x 300mm)
- Weight: 13.2 lbs
In the box:
- Harman Kardon HK 3700 Stereo Receiver
- Remote control
- Power cord
Sales Stats
- Speed to First Woot:
- 8h 30m 4.550s
Purchaser Experience
Purchaser Seniority
Quantity Breakdown
Percentage of Sales Per Hour
12 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 |
---|
Percentage of Sales Per Day
Mon | Tue | Wed | Thu | Fri | Sat | Sun |
---|
Woots by State
Best sellers in Electronics
-
(NEW) Neat Bumblebee II Professional Cardioid USB Condenser Microphone$1699 $99.9983% off Reference Price
-
Apple Watch Braided Solo Loop - Black, White Hues$2999 $99.0070% off Reference Price
-
Apple Watch Braided Solo Loop - Blue Hues$2999 $99.0070% off Reference Price
-
Apple Watch Solo Loop - Black, White Hues$1999 $49.0059% off Reference Price