Woot! customers who are Amazon Prime members can enjoy special shipping benefits on Woot!, including:
Amazon Prime membership required. See individual offer pages for shipping details and restrictions. Not valid for international shipping addresses.
Get started by logging in with Amazon or try a 30-day free trial of Amazon Prime*
Login with Amazon Try a 30-day free trial of Amazon Prime*Re-login required on Woot! for benefits to take effect
Denon Professional's Solution Series is designed to be the best friend of audio contractors. It's specialty is solving audio challenges easily and inexpensively by getting signal to someplace that would be otherwise difficult or inconvenient. Simple to install, configure and operate, the Solution Series products belong in the toolbox of every audio installer.
The DN-200AZB is a compact Bluetooth® audio receiver with a built-in 20W RMS, 4-ohm, 70/100V Class D amplifier. It lets you add an amp with wireless stereo Bluetooth audio reception to any professional audio system. Once you pair your Bluetooth device to DN-200AZB, you can send your device’s audio signal to your loudspeakers, powered by the DN-200AZB.
Key Features:
Shipping Note: Shipping to Alaska, Hawaii, P.O. Boxes, and APO addresses is not available for this item
Warranty: 1 Year Denon Warranty
Amplifier
Output: 70V/100V/4Ω, 20W RMS, Class D design
Frequency Response: 50 Hz – 23 KHz
Signal-to-Noise Ratio: 90 dB
THD: < 0.1%
Input Impedance: 10 KΩ
Bluetooth Specification
Version: CSR 4.0
Maximum Transmission Power: Class 2, 4 dBm
Transmission Frequency: 2.4 GHz – 2.480 GHz
Transmission Range: Up to 100 feet / 30.5 meters
Receiver Sensitivity: -80 dBm @ 0.1% BER
Supported Profiles: AVCTP 1.0, AVRCP 1.0, GAVDP 1.2, AVDTP 1.0, A2DP 1.2, Hands-Free Profile (HFP) 1.5, Headset Profile (HSP) 1.1
Supported Codec: SBC, MP3, AAC, aptX
Inputs
1 x 3-pin Euroblock input (R, G, L), up to 16 AWG
Outputs
1 x 4-pin Euroblock output (Common, 4 Ω, 70 V, 100 V), up to 16 AWG
1 x power adapter input
General
Power: 15V DC, 2.5 A, center-positive (power adapter included)
Dimensions (W x D x H): 6.4” x 6.0” x 1.9” (163 mm x 153 mm x 48 mm)
Weight: 3.1 lbs. (1.4 kg)
In the box:
Amplifier
Output: 70V/100V/4Ω, 20W RMS, Class D design
Frequency Response: 50 Hz – 23 KHz
Signal-to-Noise Ratio: 90 dB
THD: < 0.1%
Input Impedance: 10 KΩ
Bluetooth Specification
Version: CSR 4.0
Maximum Transmission Power: Class 2, 4 dBm
Transmission Frequency: 2.4 GHz – 2.480 GHz
Transmission Range: Up to 100 feet / 30.5 meters
Receiver Sensitivity: -80 dBm @ 0.1% BER
Supported Profiles: AVCTP 1.0, AVRCP 1.0, GAVDP 1.2, AVDTP 1.0, A2DP 1.2, Hands-Free Profile (HFP) 1.5, Headset Profile (HSP) 1.1
Supported Codec: SBC, MP3, AAC, aptX
Inputs
1 x 3-pin Euroblock input (R, G, L), up to 16 AWG
Outputs
1 x 4-pin Euroblock output (Common, 4 Ω, 70 V, 100 V), up to 16 AWG
1 x power adapter input
General
Power: 15V DC, 2.5 A, center-positive (power adapter included)
Dimensions (W x D x H): 6.4” x 6.0” x 1.9” (163 mm x 153 mm x 48 mm)
Weight: 3.1 lbs. (1.4 kg)
In the box:
| 12 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 |
|---|
| Mon | Tue | Wed | Thu | Fri | Sat | Sun |
|---|
